Wiring Kits for LC-LJ Holden Torana fitted with Series 1,
Series 2 or Ecotec Holden 3.8 Litre V6 or V8 EFI Engine and
For the V6 application, the
engine mounts are used in conjunction with original red motor
Our engine bay harness plugs
into the original wiring near power booster on drivers side.
The ECM is mounted on the
LHS kick panel or above the glove box.
Our wiring loom
is supplied on a changeover basis for the engine to computer
loom. If no changeover is supplied an additional cost of $200
may vary if Ecotec engine is used.