Wiring Kits for LH-LX-UC Holden Torana or Sunbird fitted with
Series 1, Series 2 or Ecotech Holden 3.8 Litre V6 or V8 EFI
Engine and Transmission.
For the V6 application, the
engine mounts are used in conjunction with original red motor
6cyl rubbers. Our engine bay harness plugs into the original
wiring near power booster on drivers side. The ECM is mounted
on the LHS kick panel or above the glove box.
Our wiring loom
is supplied on a changeover basis for the engine to computer
loom. If no changeover is supplied an additional cost of $200