For more information on any
of these new products call CAE PERFORMANCE PRODUCTS on 03 5472 1442 |
|
Holden HQ-WB 'RACK-IT' Power Steering Rack Kit |
| Description
|
| CAE Performance Products now supply a Power Steering Rack Conversion Kit to suit Holden HQ-WB Applications. This rack comes powder coated & includes Mounting Brackets, Tie Rod Ends, Steering Uni's, DD Steering
|
| Shaft, Heim Joint, Fittings & Bolts. For enquiries, call us on 03 5472 1442
|
|
|
| Features:
|
| * New Power Steering Rack
|
| * Australian Made & Designed to Suit Application
|
| * Complete Bolt-On Kit, Suitable with Factory Steering Column
|
| * Engineered Approved Product
|
| * Perfect Upgrade For Improved Driveability
|
| * We Can Supply All Other Accessories Required to Upgrade Your Power Steering System: Power Steering Pumps, Hoses, Fittings Etc.
|
|
![](././new_products/1-1Iv-CAE-Performance-Products-HQ-WB_Holden_Power_Rack.jpg)
|
|
1955-56-57 Chevrolet Power Steering Rack Kit - Right Hand Drive |
| Description
|
| CAE Performance Products now supply a Power Steering Rack Conversion Kit to suit 1955-1956-1957 Chevrolet Applications. This rack comes powder coated & includes Mounting Brackets, Tie-Rods, Fittings & Bolts. For inquiries call us on 03 5472 1442
|
|
|
| Features
|
| * Brand New Power Steering Rack
|
| * Suitable For Right Hand Drive Applications
|
| * Perfect Upgrade For Improved Drive-ability
|
| * We supply all other accessories required to install your Powering system: Power Steering Pumps, Hoses, Fittings, Steering Uni's Etc.
|
|
![](././new_products/1-1Iw-CAE-Performance-Products-55-57_Chevrolet_Power_Rack.jpg)
|
|
Original Fuel Tank Modifications Suit EFI In-Tank Fuel Pump Setups - Later Model EFI Engine Conversions. |
| Description
|
| CAE Performance Products can now modify your existing fuel tank to work in conjunction with aftermarket EFI In-Tank Fuel Pumps. This keeps the factory fuel tank look, perfect for the 'less-is-more' approach. Ideal for Holden LS1-LS2-LS3-LSA, Ford 6 cylinder Barra & V8 Engine Conversions. We can supply Fuel Pumps, Fuel Rings, Weld Rings, Fittings & much more. For enquiries call 03 5472 1442.
|
|
|
| To view our range of EFI Fuel components CLICK HERE
|
|
![](././new_products/1-1Ix-CAE-Performance-Products-Fuel_Tank_Mods.jpg)
|
|
Engine & Transmission Conversion Kits Suit Holden LS1 LS2 LS3 LSA Into Early Commodores, Toranas, HQ-WB, HK-HT-HG, Nissans, 1955-1957 Chevrolet |
| Description
|
| CAE Performance Products have various Engine Conversion Kits available that are both designed & manufactured within Australia. The popular LS Conversion is still going strong, with Kits available to suit Early Commodores, Toranas, HQ-WB, HK-HT-HG, 1955-1957 Chevrolet & Nissans. All products provided in our Conversion Kits are Engineered approved. For enquiries call 03 5472 1442
|
|
|
| To view our full range of Engine Conversion Kits CLICK HERE
|
|
![](././new_products/1-1Iy-CAE-Performance-Products-LS_Conversion_Kits.jpg)
|
|
CAE Performance Products Ford BA-BF-FG Gearbox Crossmembers Suit GM Transmissions |
| Description
|
| CAE Performance Products now manufacture their own Gearbox Crossmembers to suit Ford BA-BF-FG Applications running a GM-Style T400 & Powerglide Automatic Transmision. Also available for this conversion is a Starter Adaptor Plate Kit (G/R-02AP-UNI), which uses a 'Hi-Torque' Gear Reduction Starter Motor G/R-02/6CYL-CONVERSION for strength & reliability. For enquiries call 03 5472 1442
|
|
|
|
|
|
|
|
![](././new_products/1-1Iz-CAE-Performance Products Ford_BA-BF-FG_Gearbox_Crossmembers_GM_T400_Powerglide.jpg)
|
|
CAE Performance Products 'Hi-Tech' 170Amp Alternator |
| Description
|
| CAE Performance Products now manufacture their own New 'Hi-Tech' 170Amp Alternator. It suits Chev, Chrysler, Ford and Holden V8 and Six Cylinder Applications. For inquires call 03 5472 1442
|
| Features:
|
| * Designed and made in Australia by CAE Performance Products
|
| * Suits:
|
| * Chev Small Block 283-400 and Big Block 396-500
|
| * Chrysler 318-360 and 383-440
|
| * Ford Cleveland 302-351 and Windsor 302-351
|
| * Holden 308-304 and 253 Red-Blue and Black 6Cyls.
|
| * Special Applications can be catered for.
|
| * Features:
|
| * 170 Continuous charging amps
|
| * Size: Diameter 135mm - Length 175mm - 170mm mounting to adjuster bolt centers
|
| * Drive pulleys available in either billet aluminum - steel - single or twin 'V' and 6 groove serpentine
|
| * Finished in natural Machined Aluminium finish or Optional Polished aluminum finish - Black Anodized (other colours on request)
|
| * Suitable for Custom & Classic vehicles - Street Machines - Street Rods and 4WD's - Race Car Applications etc. The 'Hi-Tech' provides sufficient power for: Sound Equipment - High Power Lighting - EFI systems and other accessories such as Electric Fuel pumps - Electric Power Steering - Air Conditioners - Thermo Fans.
|
|
|
|
|
|
|
|
![](././new_products/1-1Ja-CAE-Performance Products Billet_170Amp_Alternator.jpg)
|
|
Wilwood Brake Kits AVAILABLE NOW - CAE Performance Products |
| Description
|
|
|
| CAE Performance Products can now supply 2" Drop stub axles, fitted with Wilwood 320mm disc and dust booted 4piston Wilwood Brake Calipers to suit Chevrolet 1955-56-57 models. 'Stubtech' stub axles are Australian made and Engineered. Wilwood Brakes are also engineered for Australian conditions.
|
| For further information please contact CAE Performance products.
|
|
|
|
|
|
|
|
![](././new_products/1-1Jb-CAE-Performance-Products-Wilwood_1955-57-Chev_Disc-Brake-Kit.jpg)
|
|
CAE Performance Products 'Performanator' 220Amp Alternator |
| Description
|
| CAE Performance Products now manufacture their own New 'Performanator' 220Amp Alternator. It suits Chev, Chrysler, Ford and Holden V8 and Six Cylinder Applications. For inquires call 03 5472 1442
|
| Features:
|
| * Designed and made in Australia by CAE Performance Products
|
| * Suits:
|
| * Chev Small Block 283-400 and Big Block 396-500
|
| * Chrysler 318-360 and 383-440
|
| * Ford Cleveland 302-351 and Windsor 302-351
|
| * Holden 308-305 and 253 Red-Blue and Black 6Cyls.
|
| * Special Applications can be catered for.
|
| * Features:
|
| * 220 Continuous charging amps
|
| * Size: Diameter 150mm - Length 160mm - 170mm mounting to adjuster bolt centers
|
| * Drive pulleys available in either billet aluminum - steel - single or twin 'V' and 6 groove serpentine
|
| * Finished in natural Machined Aluminium finish or Optional Polished aluminum finish - Black Anodized (other colours on request)
|
| * Suitable for Custom & Classic vehicles - Street Machines - Street Rods and 4WD's - Race Car Applications etc. The 'Performantor' provides sufficient power for: Sound Equipment - High Power Lighting - EFI systems and other accessories such as Electric Fuel pumps - Electric Power Steering - Air Conditioners - Thermo Fans.
|
|
|
|
|
|
|
|
![](././new_products/1-1K-CAE-Performance Products Billet_220Amp_Alternator.jpg)
|
|
LH-LX-UC HOLDEN TORANA 4-INTO-1, 1 3/4" PRIMARIES WITH A 3" FLANGED OUTLET TO SUIT LS1-LS2-LS3-LSA ENGINES. |
| Description These headers are perfect for street & performance applications, giving a compromise between best fit and large pipe diameter. These headers are also available now through our Facebook store, so check em out!! For all inquiries, please call us on 03 5472 1442.
|
|
|
| Features
|
| * Includes: Header Plate Gaskets, Reducer Cones (3" Flanged > 2 1/2" Outlet) & Flange Gaskets.
|
| * 4 Into 1 Mandrel Bent Design.
|
| * 10mm Laser Cut Header Plate & Collector Flanges.
|
| * 12 Month Manufactures Warranty.
|
|
|
| Can be supplied with other conversion components if required. Please view this Link to view our full list of components
|
| $1,650.00 Incl. GST
|
|
![](././new_products/1-1L-LH-LX-TORANA-4-INTO-1-HEADERS.jpg)
|
|
21 Circuit Universal Vehicle Wiring Harness |
| Description
|
| CAE Performance Products now supply a 21 Circuit Universal Vehicle Wiring Harness to suit a wide range of vehicles, including: Holden, Ford, Chevrolet & Chrysler. For inquiries call 03 5472 1442
|
|
|
| Features
|
| * Suits Various Application including: Holden, Ford, Chevrolet & Chrysler.
|
| * Includes: Fuse Box, Plugs, Relays, Fuses, Colour-Coded Instructions.
|
|
![](././new_products/1-1M-21-Circuit-Universal-Vehicle-Harness.jpg)
|
|
12 Circuit Universal Vehicle Wiring Harness |
| Description
|
| CAE Performance Products now supply a 12 Circuit Universal Vehicle Wiring Harness to suit a wide range of vehicles, including: Holden, Ford, Chevrolet & Chrysler. For inquiries call 03 5472 1442
|
|
|
| Features
|
| * Suits Various Application including: Holden, Ford, Chevrolet & Chrysler.
|
| * Includes: Fuse Box, Plugs, Relays, Fuses, Colour-Coded Instructions.
|
|
![](././new_products/1-1N-12-Circuit-Universal-Vehicle-Harness.jpg)
|
|
FORD 6cyl Barra BA-BF-FG Adaptor Plate and Starter Suit GM Auto Trans Missions. |
| Description
|
| CAE Performance Products now manufacture an Adaptor Plate Kit and Starter to suit FORD 6cyl Barra BA-BF-FG to fit GM Auto Trans Missions. For inquires call 03 5472 1442
|
|
|
| Features
|
| * Suits Ford BA-BF-FG 6cyl Barra, and Turbo Engines
|
| * Includes Adaptor plate and Hi-Torque Starter all bolts and alignment dowels.
|
| * This kit is for conversion to GM T350-T400 and Powerglide Auto Transmissions.
|
| Note: Custom Converter will have to be made. |
|
![](././new_products/1-1O-Falcon XW-XY Barra Engine Adaptor Plate Conversion.jpg)
|
|
CAE Performance Products Electronic Gauges with Chrome Bezel |
| Description
|
| CAE Performance Products have available now Electronic Gauges with Chrome Bezels. For inquires call 03 5472 1442.
|
|
|
| Features
|
| * Enhance your Hot Rod, Classic or Street Machine
|
| * Chrome Bezel with black writing on a white face
|
| * Quality made VDO 85mm or 100mm Speedo and Tacho
|
| * Smaller 52mm auxiliary Gauges (Senders and adapters are optional)
|
| * Suited Performance and Street application
|
| * Electric analogue Speedo with LCD Odometer
|
| * Illumination through Dial and Pointer
|
| * Available for 12V and 24V applications
|
| * Easy to install instructions.
|
|
|
|
|
|
|
|
![](././new_products/1-1p-CAE Performance ProductsVDO Chrome Bezel Electronic Guages.jpg)
|
|
LED Strip Light |
| Description
|
| CAE now sell LED Flexible Camping or Break Down Light 12V 1.2 Meter Length with Touch Dimmer.
|
| Features
|
| * Fully Flexible with Universal Mounting
|
| * 1400 Lumen High Power Light Output
|
| * 1.2M Length
|
| * 6000K Super Bright Colour Temperature
|
| * Weatherproof and Easy to Store
|
|
![](././new_products/1-1q-LED Strip light.jpg)
|
|
CAE PERFORMANCE PRODUCTS |
| Description
|
| CAE now supply a NEW Engine Management loom to suit Chev LS-Series engines with Auto and Manual Trans and more
|
| Features
|
| * Brand New Loom not changeover
|
| * Complete with original style waterproof connectors
|
| * Only approximately 10 to 12 wires to connect to car
|
| * All instructions provided
|
| * CAE provide many other products for conversion
|
| * For more information go here....
|
|
|
|
![](././new_products/1-1qCAE Performance Products EFI Loom.jpg)
|
|
FORD FALCON XR-XT-XW-XY Conversion Kit to suit Ford EB to AU V8 Windsor Engines with Left hand Starter. |
| Description
|
| CAE Performance Products now manufacture a V8 EFI Engine Conversion kit for FALCON XR-XT-XW-XY. This kit includes conversion cross members and optional Headers, EFI Loom, Strut bar and more. For inquires call 03 5472 1442
|
|
|
| Features
|
| * Suits Ford EB-AU V8 Windsor with B.T.R and T5 Transmission into Ford Falcon XR-XT-XW and XY.
|
| * All parts are available separately.
|
| * Includes extensions for rear cross member supports to
|
| accommodate the longer transmission.
|
| * Use your original rear crossmember. Crossmember not part of kit.
|
| * This kit comes with engineers compliance certificate.
|
| * Use original EB-AU V8 Windsor engine mount rubbers and trans mount.
|
| * All Bolts supplied and Customer Assembly Instructions included.
|
| * Also available -
|
| Engine Mount Rubbers.
|
| Strut Tie Bar kit.
|
| Optional Speedo Conversion.
|
| EFI Engine loom and Computer Re-Program to suit conversion.
|
| Castle Headers, Mandrel bent headers to suit conversion.
|
| 2 speed wiper motor conversion.
|
| Image below shows parts available for Engine Trans conversion for price call 03 5472 1442. Parts sold separately.
|
|
|
|
![](././new_products/1-1r-Falcon XW-XY Windsor V8 Engine Conversion.jpg)
|
|
Holden HK-HT-HG Billet Power Rack and Pinion conversion Kit. |
| Description
|
| CAE Performance Products now manufacture a mounting kit to fit their New Billet Power Rack and Pinion steering into the Holden HK-HT and HG. For inquires call 03 5472 1442
|
|
|
| Features
|
| * The Kit consist of Rack Support brackets (Weld on) and Billet mounting clamps.
|
| * Strengthening Plate for the crossmember front support.
|
| * This kit comes with engineers compliance certificate.
|
| * Universal Power Rack with hi-tech Billet style appearance.
|
| * Hi-Tech Alloy Servo housing.
|
| * Optional Billet Servo housing (shown in image).
|
| * Optional Polished Aluminium Finish.
|
| * Suit axle weights up to 2000Kg (4000lbs).
|
| * Stainless Steel Braided lines and fittings.
|
| * We can supply all other accessories required to install your Power Steering system.
|
| * Power Steering Pump.
|
| * Hoses and Fittings.
|
| * Steering Columns and Uni's.
|
| * Double 'D' Collapsible Shaft.
|
|
|
| Can be supplied in kit form or installed by CAE.
|
|
|
| For a list of Rack and Pinion Conversions options click
|
| HERE...
|
|
|
|
|
|
![](././new_products/1-1t-HK-T-G Rack-Pinion Conversion.jpg)
|
|
FORD FALCON XR-XT-XW-XY Conversion Kit to suit Ford BA-BF-FG 6cyl Barra and Turbo Engines. |
| Description
|
| CAE Performance Products now manufacture a 6cyl and V8 EFI Engine Conversion kit for FALCON XR-XT-XW-XY. This kit includes conversion cross members and optional Headers, EFI Loom, Strut bar and more. For inquires call 03 5472 1442
|
|
|
| Features
|
| * Suits Ford BA-BF-FG 6cyl Barra, and Turbo Engines and
|
| Transmission into Ford Falcon XR-XT-XW and XY.
|
| * All parts now available seprtate.
|
| * Contains a Bolt-in front Engine Mount cradle.
|
| * Includes extensions for rear cross member supports to
|
| accommodate the longer transmission.
|
| * Use your original rear crossmember. Crossmember not part of kit.
|
| * This kit comes with engineers compliance certificate.
|
| * Use original BA-BF-FG 6cyl engine mount rubbers and original XR to XW rear cross member.
|
| * All Bolts supplied and Customer Assembly Instructions included.
|
| * Also available -
|
| Engine Mount Rubbers.
|
| Strut Tie Bar kit.
|
| Optional Speedo Conversion.
|
| EFI Engine loom and Computer Re-Program to suit conversion.
|
| Castle Headers, Mandrel bent headers to suit conversion.
|
| 2 speed wiper motor conversion.
|
| More about this conversion Here
|
| Image below shows some parts available for engine conversion for price call 03 5472 1442. Parts sold separately.
|
|
![](././new_products/1-1u-Falcon XW-XY Barra Engine Conversion.jpg)
|
|
FORD FALCON XR-XT-XW-XY Replacement wiper motor. |
| Description
|
| CAE Performance Products now supply a FALCON XR-XT-XW-XY Replacement wiper motor.
|
| For inquires call 03 5472 1442
|
|
|
| Features
|
| * Suits Replacement Wiper Motor for Ford Falcon XR-XT-XW and XY
|
| * Includes a wiring loom and 2 speed switch.
|
| * Connects to original Arms and Posts
|
| * Features Hi and Low Speeds and Park and complies with ADR standards.
|
| * Easy to install and comes with full instructions.
|
| * Also available New Wiper Arms and Blades on request.
|
| * Included Mounting Plate, Crank, Screws and Insulation rubbers
|
| Link here...
|
|
|
|
|
|
|
|
![](././new_products/1-1v-Falcon XW-XY Replacement Wiper-Motor.jpg)
|
|
Universal Power Rack. |
| Description
|
| CAE Performance Products now supply a Universal Power Rack. This rack comes
|
| in front and rear of axle applications with hi-tech Billet style appearance.
|
| For inquires call 03 5472 1442
|
|
|
| Features
|
| * Suits Universal application
|
| * Front or Rear of axle steering type available
|
| * length made to suit your application
|
| * Hi-Tech Billet style housing
|
| * Optional Billet Servo housing (shown in image)
|
| * Optional Polished Aluminium Finish
|
| * Suit axle weights up to 2000Kg (4000lbs)
|
| * Stainless Steel Braided lines and fittings
|
| * We supply all other accessories required to install your Powering system
|
| * Power Steering Pump
|
| * Hoses and Fittings
|
| * Steering Columns and Uni's
|
| * Double 'D' Shaft
|
|
|
|
|
|
|
|
![](././new_products/1-1w CAE Performance Products Power Rack.jpg)
|
|
New Disk Brake Conversion Kits |
| Description
|
| New Disk Brake Conversion Kit for HQ-WB Sedans. For inquires call 03 5472 1442.
|
|
|
| Features
|
| * Suit HQ-WB Sedans, Wagons, Utes and Vans.
|
| * Uses Commodore VT-VZ Disks and Calipers.
|
| * This kit is an up grade for better brakes on performance Holdens.
|
| * Note this kit requires Disk Brake Stub axles.
|
| * New Calipers and rotors also available.
|
| * Easy to install
|
| * Replacements for Factory Disk Brakes
|
|
|
|
|
|
![](././new_products/1-1x Disk Conv HQ-WB.jpg)
|
|
CASTLE HEADERS Commodore V6 Headers. |
| Description
|
| CASTLE HEADERS now make (CH-71) headers to suit V6 Commodore VB-VS and Holden HQ-WB conversions. For inquires call 03 5472 1442.
|
|
|
| Features
|
| * Suits VC-VB-VH-VK conversions and VN-VP-VS V6 3.8Lt & ECOTEC
|
| * Also suits Holden HQ-HX-HJ-WB Sedan, Wagon, Ute and Van With V6 Conversion
|
| * 3 INTO 1 DESIGN. 1 3/4'' PRIM.
|
| * Includes 'Y' PIECE with 2.5in. OUTLET
|
| * Suits AUTO in Sedan and Wagon
|
| * All built from Mandrel bent tube with 10mm flanges
|
| * Optional Hi-Flow Cat and center pipe suit VB-VK to connect to Red Back Performance Exhaust
|
| * Pt. No. Sedan Front muffler M100 Rear muffler - STR-104 Wagon STR-109
|
| * Easy to install comes with gaskets
|
| * Replacements for Factory applications on VN-VP-VS Commodore
|
|
|
|
|
|
|
|
![](././new_products/1-1y CASTLE HEADERS CH-71.jpg)
|
|
Castle Headers New POWERFLOW Hot Dog Mufflers. |
| Description
|
| Castle Headers now have a range of POWERFLOW Stainless Steel Hot Dog mufflers in various sizes for universal applications. They are available now, for inquires call 03 5472 1442.
|
|
|
| Features
|
| * Made from 304 stainless steel.
|
| * Large Range of sizes and configurations.
|
| * Polished stainless finish.
|
| * Stainless inside components.
|
| * Available Sizes: 2in. - 2 1/2in. & 3in.
|
| * Round body Configurations in various length call for more.
|
| * The Powerflow hi-performance muffler are designed to deliver the extra power you have been looking for.
|
|
|
|
|
|
|
|
|
|
![](././new_products/1-A-Castle Headers POWERFLOW Hot Dog Mufflers.jpg)
|
|
CAE Performance Products Injector Extension. |
| Description
|
| CAE Performance Products now supply Injector Extension. For inquires call 03 5472 1442.
|
|
|
| Features
|
| * Greater clearance around rocker cover.
|
| * Allows easy fuel rail connection.
|
| * Gives better access in tight applications.
|
| * Easy to install.
|
|
|
|
|
|
|
|
![](././new_products/1-A1-CAE Performance Products Injector Extension.jpg)
|
|
Castle Headers new Chrysler 5.7 Litre Hemi Block Huggers. |
| Description
|
| Castle Headers now manufacture Block Hugger headers for Chrysler's new Hemi 5.7 Litre (345ci) engine. For inquires call 03 5472 1442.
|
|
|
| Features
|
| * Suit Chryslers new 5.7Ltr (345c.i.) Hemi.
|
| * 1 3/4" primaries, 3" Collector with 10mm 2 bolt flange.
|
| * Precision Laser cut 10mm Header Plates
|
| * Suited to Performance and Street application.
|
| * Suit Hot Rods, Kit Cars and Engine Conversions.
|
|
|
|
|
|
|
|
![](././new_products/1-AB-Castle Headers - Chrysler 345 Hemi.jpg)
|
|
CAE Performance Products |
| Description
|
| CAE Performance Products have a range of replacement exhaust manifold/Converter combination to suit many small Cars and 4WDs.
|
|
|
| Features
|
| * Suit many small Cars and 4wd Vehicles like Nissan Xtrail.
|
| * Full stainless steel construction including Cat Converter.
|
| * Fully serviceable gaskets optional.
|
| * 12 month warranty - unlimited kilometres.
|
|
|
|
|
|
|
|
|
|
![](././new_products/1-CAE Nissan Xtrail manifold.jpg)
|
|
UNIVERSAL ENGINE LIFT HOOKS |
| Description
|
| CAE Performance Products now supply a set of Universal Engine Lift Hooks. These Hooks suit most V8 engines from Small Block Chev-Windsor-Chrysler 318-LS Chev to Big Block Ford, Chrysler, Chev and more.
|
| For inquires call 03 5472 1442.
|
|
|
| Features
|
| * Suit most V8 engines from Small Block Chev, Windsor, Chrysler 318, LS Chev, Holden 253-308 and EFI.
|
| * Big Block Ford, Chrysler, Chev and more.
|
| * Bolt to Exhaust ports each side of engine.
|
| * Easy to fit multi-bolt pattern adaptor flange.
|
| * Solid 10mm laser plate construction.
|
| * Check the Catalogue for more details.
|
|
|
|
|
|
|
|
|
|
![](././new_products/1-CAE Performance Products A Lift Bracket.jpg)
|
|
GM - LS1-2-3 Carby Loom. |
| Description
|
| CAE Performance Products have developed an Engine Wiring Loom to suit LS1-2-3 engines fitted with a Carby.
|
| For inquires call 03 5472 1442.
|
|
|
| Features
|
| * Suits LS1-2-3 engines fitted with carby and MSD ignition.
|
| * Car Loom Kit to suit VN-VS and a Universal Loom Kit.
|
| * Thermo Fan operation with adjustable Temp Controller using factory temp sender.
|
| * Fuel Pump Controller.
|
| * MSD Ignition Controller suit 24 and 58 tooth reluctor wheel
|
| * Oil and Temp Sender connections.
|
| * Starter and Alternator connections.
|
| * Provision for Tacho connector and more.
|
| * Easy to install loom is Plug n Play type.
|
|
|
|
|
|
|
|
|
|
![](././new_products/1-CAE Performance Products LS Carby Loom .jpg)
|
|
GM - LS1-2-3 to 58 Chev Conversion Kit. |
| Description
|
| CAE Performance Products have developed an Engine Mount Conversion Kit that puts a LS1-2-3 engine into a Chev Belair 1958 to 64 and 1965 to 70.
|
| For inquires call 03 5472 1442.
|
|
|
| Features
|
| * Suits LS1-2-3 series of engines
|
| * Bolt in application for Chev Belair 1958 to 64 and 1965 to 70
|
| * Engine mount kit comes with rubber mounts
|
| * Uses standard V8 Chev rubber mount
|
| * Easy installation.
|
|
|
|
|
|
|
|
|
|
![](././new_products/1-CAE Performance Products LS Chev58.jpg)
|
|
CAE Performance Products Electronic Power Steering. |
| Description
|
| CAE Performance Products now supply Electronic Power Steering. For inquires call 03 5472 1442.
|
|
|
| Features
|
| * Reduce effort in vehicles with steering wheels weighing in up to 4500lbs.
|
| * The new computer modules sealed weather resistant box to withstand very harsh conditions
|
| * Comes with a universal square bracket.
|
| * Suited to Performance and Street application.
|
| * Effective vibration absorption.
|
| * Easy to install.
|
| * Replacements for Factory applications.
|
| * Image inset shows how it assembles to a steering column.
|
| * Column and fitting not included.
|
|
|
|
|
|
|
|
![](././new_products/1_CAE Performance Products ELECTRA STEER.jpg)
|
|
CAE Performance Products POWER MOUNT Engine and Trans Mounts. |
| Description
|
| CAE Performance Products have a POWER MOUNT Trans Mount replacement. For inquires call 03 5472 1442.
|
|
|
| Features
|
| * suit G.M. RWD Cars and Trucks Transmission Mount.
|
| * Replacement for A1115 and A1158 Trans mount
|
| * Performance Mount uses bonded Polyurethane system
|
| * Suited to Performance and Street application.
|
| * Effective vibration absorption.
|
| * Longer Life over original mounts.
|
| * Easy to install.
|
| * Replacements for Factory applications.
|
|
|
|
|
|
|
|
![](././new_products/1_CAE Performance Products POWER MOUNT Engine Mounts.jpg)
|
|
1958 CHEVROLET HEADERS |
| Description
|
| CASTLE HEADERS now have Headers to suit 1958 Chevrolet Biscayne and Impala. These Headers are mandrel bent 4 into 1 design.
|
| For inquires call 03 5472 1442.
|
|
|
| Features
|
| * Suit 283, 307, 327, 350 and Stroked Small Block Chev V8.
|
| * 4 into 1 desigh for high gas flow.
|
| * 1 3/4in primaries and 3in collector.
|
| * Header tubed are Mandrel Bent for best performance.
|
| * Header and Collector flanges are made from 10mm Laser Cut Plates.
|
| * Easy to fit and come with instructions.
|
| * Supplied with Header Bolts, Gaskets and Collector Reducers Cones.
|
| * Headers have excellent ground clearance.
|
|
|
|
|
|
|
|
|
|
![](././new_products/1_Castle Headers - CH-121 CHEV 1958 HEADERS.jpg)
|
|
CASTLE HEADERS FOR TOYOTA SOARER V8 |
| Description
|
| Castle Headers now supply 4 into 1 headers for the Toyota Soarer with 1UZ-FE V8 engine.
|
| For inquires call 03 5472 1442.
|
|
|
| Features
|
| * Suit Toyota Soarer 1991 to 1997 with 1UZ-FE V8 engine.
|
| * 4 into 1 design mandrel bent tubes for optimum performance.
|
| * 1 5/8in and optional 1 3/4in primaries with 3in collector.
|
| * 10mm laser cut header plates for accuracy and strength.
|
| * Easy to fit comes with instructions.
|
|
|
|
|
|
|
|
|
|
![](././new_products/1_Castle Headers - ToyotaSoarer 1uz-fe-v8.jpg)
|
|
EFI Loom to suit Commodore EFI Black with Delco 808 Computer. |
| Description
|
| CAE Performance Products have developed an Engine Wiring Loom to suit Commodore EFI Black motor.
|
| For inquires call 03 5472 1442.
|
|
|
| Features
|
| * Commodore EFI Black and replaces the original Bosch Computer.
|
| * Car Loom Kit to suit Commodore EFI Black.
|
| * Thermo Fan operation with adjustable Temp Controller using factory temp sender.
|
| * Fuel Pump Controller.
|
| * Distributor required for modification.
|
| * Oil and Temp Sender connections.
|
| * Starter and Alternator connections.
|
| * Provision for Tacho connector and more.
|
| * Easy to install loom is Plug n Play type.
|
|
|
|
|
|
|
|
|
|
![](././new_products/1_Commodore EFI Black 202.jpg)
|
|
SIDE PIPE MUFFLER INSERTS |
| Description
|
| CASTLE HEADERS now sell side pipe muffler inserts
|
| Features
|
| * Suit Cobra and Corvette Side Pipes
|
| * 3 Sizes available 26in - 28in & 30in
|
| * 3in inside diameter
|
| * Hot Dog style
|
| * Heavy Duty construction
|
| * MADE IN USA
|
|
![](././new_products/2 - Castle Headers Long Muffler Insert.jpg)
|
|
CAE Performance Products Universal Engine Mount. |
| Description
|
| CAE Performance Products are developing a Universal Engine Mounting Kit for Ford 5.4Lt V8 engines. For inquires call 03 5472 1442.
|
|
|
| Features
|
| * Suit Engine Ford 5.4Lt conversion to Hot Rod or Cobra kit cars and more.
|
| * 5mm laser precision cut plate.
|
| * Nolathane bush engine mount.
|
| * Easy to install just position then weld to chassis rail.
|
|
|
|
|
|
|
|
|
|
![](././new_products/2-CAE Performance Products Universal Engine Mount Kit.gif)
|
|
Castle Headers now have Tri-Y Headers for the FORD Mustang from 1964 to 1970 |
| Description
|
| Castle Headers now have available headers to suit all Ford Mustang fitted with 289 and 302 Windsor. For inquires call 03 5472 1442.
|
|
|
| Features
|
| * 1 5/8'' primaries - 1 7/8'' secondaries and 2 1/4'' outlet Tri 'Y' design.
|
| * Mandrel bent tubes.
|
| * 10mm laser cut header plate.
|
| * 2 1/4in 2 Bolt Flange Outlet.
|
| * Suit Mustang from 1964 to 1970 fitted with a 289 and 302 Windsor V8.
|
| * Easy to install.
|
| * 2 Years warranty - unlimited kilometres (conditions may apply).
|
|
|
|
|
|
|
|
|
|
![](././new_products/2-Castle Headers MUSTANG TRI-Y Headers.jpg)
|
|
Castle Headers New POWERFLOW mufflers. |
| Description
|
| Castle Headers now have a range of POWERFLOW Stainless Steel mufflers in various sizes for universal applications. They are available now, for inquires call 03 5472 1442.
|
|
|
| Features
|
| * Made from 403 stainless steel.
|
| * Large Range of sizes and configurations.
|
| * Polished stainless finish.
|
| * Stainless inside components.
|
| * Intake and outlet type - Offset - 1in 2out - 2in 2out.
|
| * Oval and Round body Configurations.
|
| * The Powerflow hi-performance muffler is designed to deliver the extra power you have been looking for.
|
|
|
|
|
|
|
|
|
|
![](././new_products/2-Castle Headers POWERFLOW Mufflers.jpg)
|
|
Castle Headers New Headers for the FORD F100-F150-F250-F350 |
| Description
|
| Castle Headers now have available headers to suit all Ford F-trucks fitted with 429 and 460 Big Block. For inquires call 03 5472 1442.
|
|
|
| Features
|
| * 1 7/8'' primaries - 2'' secondaries and 2 1/2'' outlet Tri 'Y' design.
|
| * Mandrel bent tubes.
|
| * 10mm laser cut header plate.
|
| * 2.5in 2 Bolt Flange Outlet.
|
| * Suit Ford F100-F150-F250-F350 fitted with a 429-460 Big Block.
|
| * Easy to install.
|
| * 2 Years warranty - unlimited kilometres (conditions may apply).
|
|
|
|
|
|
|
|
|
|
![](././new_products/3-Castle Headers FORD F100 460 Headers.jpg)
|
|
CAE Performance Products Crank Trigger Wheel |
| Description
|
| CAE Performance Products can now supply 24 tooth crank trigger wheel that suits the Holden Delphi Computers (from Commodore VT to VE V8s). These can be fitted to most engines like Small Block & Big Block Chev, Holden or Ford V8 etc. Allows you to up grade older engines to sequential injection for better performance and fuel economy.
|
|
|
| Features
|
| * 24 tooth wheel to suit Delphi Computer.
|
| * Allows sequential injection on most early V8.
|
| * Fully programmable computer.
|
| * Suit Small Block & Big Block Chev, Chrysler, Ford and Holden V8.
|
| * Easy to install.
|
| * 12 month warranty - unlimited kilometres.
|
|
|
|
|
|
|
|
|
|
![](././new_products/4-CAE Performance Products Trigger Wheel.jpg)
|
|
Castle Headers Exhaust Systems |
| Description
|
| Castle Headers have introduced a new range of quality polished stainless steel exhaust systems.
|
|
|
| Features
|
| * Polished chrome like stainless steel finish.
|
| * 304 grade stainless steel.
|
| * Full stainless steel construction including internal pipes.
|
| * Mandrel bent pipes.
|
| * High-Flow design.
|
| * Suit Holden Commodore, Ford. V8 and 6cyl engines.
|
| * Available in Full cat back system or Complete including headers and hi-flow cats.
|
| * Easy to install.
|
| * Fully serviceable and individual replacement parts.
|
| * 12 month warranty - unlimited kilometres.
|
|
|
|
|
|
|
|
|
|
![](././new_products/6-Castle Headers SS Systems.jpg)
|
|
DYNOGEN |
| Description
|
| C.A.E have developed an alternator enclosed in a Generator housing
|
| which will suit Lucas C39 - C40 - C45, the old Autolite that suits
|
| Ford sidevalves and more. These are rated at 60 amps continuous
|
| with a peak of around 80 amps has regulator all built in will charge
|
| from 600rpm. They are 50% lighter and all wiring can be enclosed
|
| so it looks all original.
|
| For more info please contact C.A.E on 03-54721442 or email info@caenterprises.com.au.
|
|
|
|
|
|
![](././new_products/6a-dynogen-c42.jpg)
|
|
CAE Performance Products. |
| Description
|
| New Universal Electric Window Kits
|
| Features
|
| * Suit most Hot Rod and Street Machine applications.
|
| * Easy to install.
|
| * Robust construction.
|
| * Include Motor and Slide.
|
| * For more info call 03 5472 1442
|
|
|
|
![](././new_products/7-electric-windows.jpg)
|
|
CAE PERFORMANCE PRODUCTSPRECISION ENGINEERED TO MOVE |
| Description
|
| Coming soon : Camaro 1967-68 LH & RH Drive LS1-LS2-LS3 Engine Conversion.
|
| features
|
| * Engine Mounts and Brackets.
|
| * Large 6Ltr Capacity Sump.
|
| * Castle Headers 4into1, 1 3/4''Prim. Headers.
|
| * Transmission Cross Member and Mount.
|
| * EFI Loom and Computer.
|
| * Computer Re-Map Program.
|
|
|
| Call CAE on 03 5472 1442 for more info.
|
|
![](././new_products/8-CAE Camaro Engine Conversion.jpg)
|
|
CH-114 HOLDEN HK-HT-HG |
| Description
|
| CASTLE HEADERS now build headers for tth HK-T-G Holden with 308-304-253 engine
|
| Features
|
| * SUIT HOLDEN 304-308 EFI ENGINE
|
| * 4 INTO 1 DESIGN
|
| * 1 3/4Iin. PRIMARIES. 3in. COLLECTOR
|
| * MANDREL BENT TUBES
|
| * 10mm HEADER PLATES
|
| * MADE IN AUSTRALIA
|
|
![](././new_products/Castle Headers CH-114.jpg)
|
|
CH-82CP FORD BA-BF-FG CONNECTING PIPE |
| Description
|
| * SUITS CH-82 HEADERS.
|
| * INCLUDES 2 1/2'' HIGH FLOW EURO 4 CAT xx
|
|
![](././new_products/Castle Headers CH-82CP.jpg)
|